HCH-3000E/E Ultrasonic Thickness Gauge

Technical Parameter

Measuring range : 0.8-500mm (standard mode)

                                 3.0-20mm (coating mode)

1.Resolution : 0.01mm

2.Measurement error :

3.Thickness H less than 10mm, error  0.05mm,

   Thickness H greater than10mm, error (0.1%H+0.05mm)

4.Storage capacity : 600 measurement data

5.Storage  : Manual storage

6.Display : LCD display with backlight

Features

1.Two measurement methods: a bottom wave and echo- echo

2. Pulse ~ echo mode (standard mode, used for ordinary  thickness measurement)

3.Echo ~ echo mode (coating mode, used for measurement without removing the paint layer)

4.Reverse sound velocity measurement: the sound velocity of the material can be measured back according to the thickness of the known material

5. Automatic sensitivity gain optimization Automatically adjust the sensitivity to make the measurement more accurate

6. The probe is automatically recognized, a variety of probes can be selected, and the upper and lower limit

    alarm thresholds can be set

7.Minimum scan mode, 10 times per second, quickly  measure and capture the minimum

8.Difference mode: compare the measured thickness with  the set base value, and display the difference on the screen